INFO: Defining an Image Storage Device

"); var strParaLine = ""; for (var i = 0; i < (argLen - 2) / 2; i++) { strParaLine = ""; if (s_bNS2 || s_bOpera){ strParaLine += "" strParaLine += PopupMenu_Invoke.arguments[2 * i + 2]; strParaLine += ""; } else { strParaLine += ""); wndPopupLinks.document.close(); // Close the temporary if (!s_bNS3) { wndTemp.close(); }else { wndPopupLinks.focus(); } return true; } return false; } function reDo() { if (innerWidth != origWidth || innerHeight != origHeight) location.reload(); } if ((parseInt(navigator.appVersion) >= 4) && (navigator.appName == "Netscape")) { origWidth = innerWidth; origHeight = innerHeight; onresize = reDo; } //-->

INFO: Defining an Image Storage Device

UBQ ID Number: UBQ000051

Last Modified: 2000-06-08 at 10:43:55

SUMMARY:

DETAILS:

To perform an Integrated Static Mirror Image Backup, an image storage device must be defined. To define an image storage device there must exist a local hard disk that has not been assigned any drive letters. If the desired storage drive has any drive letters assigned, it can be un-assigned by using Disk Administrator.

Figure 1: Disk with drive letter assigned

Figure 2: Assign Drive Letter menu option

Figure 3: Unassigning drive letter

Figure 4: Select Image Device

Figure 5: Drive with no assigned drive letter

Figure 6: Commit Changes menu selection

Figure 7: Commit Changes confirmation dialog box

Figure 8: Commit Changes confirmation

To define this hard drive as an Image Storage Device or select a pre-defined device, press (Control-T) or use the option path, "Tools"/"Preferences"/"Media"/"Default Storage Device". Now use the option path: (click the down arrow on the "Show" list box)/"Image".

IMPORTANT: Using a hard drive as an Image Storage Device will erase the entire hard drive.

Figure 9: Select Image Device as a Storage Device

Either select an Image Storage Device from the list or select "Add" to define one.

Figure 10:Image Devices – none found

Figure 11:Add Image Device

Figure 12:Select Image Device from list

From the "Add Image Storage Device" screen select the desired drive using the down arrow and choose "OK".

Select an Image Storage Device for an Integrated Static Mirror Image Backups or a Tape Storage Device for an Integrated Image Backups. This is accomplished for ad hoc backups through the option path, "Tools"/"Preferences"/"Media"/"Default Storage Device"/(click the down arrow on the "Show" list box)/"Image"/(highlight an image storage device"/"OK" or press (Ctr-t).

MORE INFORMATION:

See UBQ: UBQ000024 – What is an Image Backup

See UBQ: UBQ000027 – Restoring Individual Files from an Image Backup

See UBQ: UBQ000041 – Selecting a Storage Device

See UBQ: UBQ000043 – Standard Partition Level Image Backup

See UBQ: UBQ000059 – Integrated GUI Image Recovery (Non-Boot Disk)

See UBQ: UBQ000060 – Static Mirror Image Recovery

See UBQ: UBQ000061 – Stand Alone Backup & Disaster Recovery Utility

See UBQ: UBQ000119 – Static Mirror Partition Level Image Backup

CATEGORIES:

Configuration/Administration, Disaster Recovery

VERSION:

5.x